Alaska Guide Creations Kobuk 28 Frame Pack
Log in to earn points with purchase
- Two 22" waterproof zippers for quick access, even when loaded
- Integrated load shelf with laser panels to maintain webbing route
- Four lash points on each side for securing loads
- Nearly unlimited lashing combinations with laser cut panels and provided nylon webbing loops
- Four 24" lash straps with 25mm gatekeepers and 1" auto-lock buckles included
- Two integrated water bottle pockets (one per side)
- High-viz orange zipper pulls
- 3L vertical bladder compatible
- 26" frame composed of 4 solid carbon rods, 3D printed yoke supports, and 500D nylon enclosure
- 2 piece waist belt with 22" of total adjustability (28" to 50")
- Attachment panels on waist belt provided for attaching quick access accessories
- Vertically adjustable lumbar pad to customize load bearing position and comfort
- Easily adjustable shoulder harness allows a custom fit for torso length and desired height, angle, and width
- Design allows for unmatched air flow, adjustability, and fit customization for comfort
- Harness includes chest strap and keepers for ambidextrous bladder hose retention
- Bag weight: 2lbs, 4oz
- Frame Only weight: 2lbs, 12oz
- Weight with Kobuk Frame - 5lbs
- Made in the USA
The Kobuk Frame is the foundation of Alaska Guide Creations' Kobuk Backpack Line.
The Kobuk 28 bag has a total volume capacity of 2800 cubic inches. It attaches easily to the Kobuk Frame. The bag and integrated, adjustable load shelf are primarily made of 500D Nylon and features a 10" expandable, drawstring top made of lightweight ripstop. Excluding the expanding top, the bag measures 6" x 14" x 24". The Kobuk 28 is best suited for day trips and can be compressed to a lower profile while not utilizing the full capacity of the bag. Each side has 4 lash points that can be quickly disconnected or adjusted with auto-locking buckles. Having 4 lash points per side is critical for ensuring that difficult or awkward loads are secured. Two 22" waterproof zippers make access to the main bag simple, even with a load. An additional basement zipper opens to a built in pouch that is great for storing small items that require quick access such as additional straps and hardware. Dual water bottle pockets are built in, one on each side. Laser cut panels on the back of the bag and nylon webbing loops allow for nearly unlimited lashing combinations and attachment points for customizing the pack to fit your needs for any given situation. The double layered, 500D load shelf can be deployed and adjusted for carrying extra large loads or for carrying quarters/meat. This keeps the bulk of the weight near the frame while keeping your gear and the inside of the bag clean. Inside the bag there are internal loops along each vertical zipper allow for connection of Stash Pouches which can be used for organization. There is also a hydration sleeve that will accommodate up to a 3L bladder and has an ambidextrous hose port for hose routing to the shoulder harness. The frame consists of 4 solid carbon rods, custom 3D printed yoke supports (top, middle, and bottom), and is enclosed in 500D Nylon. The fully adjustable harness and belt is constructed of closed cell, cross linked PE foam for comfort and longevity and is included with each frame.