Stone Glacier

Stone Glacier De Havilland LITE Pant

SKU
STON0099
As low as $179.00

Log in to earn points with purchase

Add to Wish List
Features
  • Weight – 1 lb. 3 oz.
  • DWR Treated Water Resistant Face
  • 89% Nylon, 11% Spandex Double Weave Textile
  • Textile Weight - 172 gm/m2
  • Knee Pad Compatible
  • Extra Large Side Zips – Stratum Layered Zipper System
  • Quite Close, Front Facing Cargo Pockets
  • Internal Cargo Pocket Cell Phone Sleeve
  • Ultralight Waistline Materials
  • Athletic Fit and Articulated Knees
  • True Boot Cut Cuff
  • Patent-Pending Contour Waist™ System
  • Reverse Coil YKK Zippers
Product Description

The all-new De Havilland LITE Pants offer the same industry-leading features as our best-selling De Havilland Pants with an updated, Nylon double weave textile that is about 25% lighter than its all-season predecessor. Built with Stone Glacier's innovative and patent-pending Contour Waist System, true boot cut cuffs, Stratum Zippered Layer System, and YKK zippers, this pant will be your go-to for all early season forays into the backcountry. Knee pad compatibility and front-facing cargo pockets that include an internal cell phone sleeve ensure comfort and easy access to necessities. If you are on the market for a backpacking pant, fit for early-season conditions, or you already love Stone Glacier's original De Havilland Pants, the De Havilland LITE Pants are sure to become your new go-to in the mountains.

Stone Glacier Sizing

Stone Glacier products are designed with an athletic fit to provide the highest level of performance in the field. Use the sizing chart below to help guide you to the appropriately sized garment. Note, the De Havilland Pants incorporate the patented Contour™ Waist System which provides approximately 3 inches of waist adjustment to create an exact fit.

How to Find Your Measurements

Note: Calculate your body measurements, then select your product size. If your measurements are between sizes, select a larger size for a looser fit or a smaller size for a tighter fit.

  1. Measured Chest: With arms relaxed at your sides, measure under your arms, around the fullest part of your chest.
  2. Measured Sleeve: With arm relaxed at your side and slightly bent, measure from center back neck, across the shoulder to elbow and down to the wrist.
  3. Measured Belt Line: Measure around your waist at the point in which your pants typically ride.
  4. Measured Inseam: From a standing position, measure from your crotch down the inside leg to the floor.

Stone Glacier's Contour Waist System - Proper Fit and Use

The patented Contour Waist™ System is designed to provide an exact fit around your waist. No more buying pants that are slightly too large or don’t fit quite right. As well, this system allows you to adjust the waist size of your pants to allow for a proper fit when layering base layers or insulation bottoms underneath. To adjust the Contour Waist, follow the below steps:

  1. Unfasten the top buckle attachment and unzip the zipper fly.
  2. While the zipper fly is unzipped, detach the left side (left as when the wearer is looking down on the zipper fly) of the zipper from the hook and loop pad by pulling it down and away, starting at the top.
  3. Reattach the zipper fly to the hook and loop pad by starting at the bottom and pressing it firmly and evenly up towards the top. Attaching the zipper at a steeper angle to the left, will adjust the pants smaller. Attaching the zipper further to the right will adjust the pants larger.
  4. Once the zipper is reattached, zip up the fly as normal and fasten the top buckle, adjusting tension as necessary. Repeat steps 3 & 4 until the proper fit is achieved.
  5. Once you find your proper fit the zipper fly will work as normal and adjustment does not need to be made again until required when layering or as desired.

Top Sizes S-XXXL

  S M L XL XXL XXXL

Measured Chest

35-38" 38 ½-41" 41 ½-44" 44 ½-47" 47 ½-50" 50 ½-53"
Measured Sleeve 33" 34" 35" 36" 37" 38"

Bottom Sizes S-M/LT

  S S/M S/MT M MT M/L M/LT

Measured Belt Line

29-31" 31-32 ½" 31-32 ½" 32 ½-34" 32 ½-34" 34-36" 34-36"

Traditional Pant Waist

29" 31" 31" 32" 32" 34" 34"
Measured Inseam 31" 31" 36 ½" 32" 36 ½" 33 36 ½"

Bottom Sizes L-XXL

L LT L/XL L/XLT XL XLT XXL
36-38" 36-38" 38-39 ½" 38-39 ½" 39 ½-41" 39 ½-41" 41-43"
36" 36" 37" 37" 38" 38" 40"
33" 36 ½" 36 ½" 36 ½" 33" 36 ½" 33"

Stone Glacier Sizing

Stone Glacier products are designed with an athletic fit to provide the highest level of performance in the field. Use the sizing chart below to help guide you to the appropriately sized garment. Note, the De Havilland Pants incorporate the patented Contour™ Waist System which provides approximately 3 inches of waist adjustment to create an exact fit. This system allows you to adjust the waist size of your pants to allow for a proper fit when layering base layers or insulation bottoms underneath.

How to Find Your Measurements

Note: Calculate your body measurements, then select your product size. If your measurements are between sizes, select a larger size for a looser fit or a smaller size for a tighter fit.

  1. Measured Chest: With arms relaxed at your sides, measure under your arms, around the fullest part of your chest.
  2. Measured Sleeve: With arm relaxed at your side and slightly bent, measure from center back neck, across the shoulder to elbow and down to the wrist.
  3. Measured Belt Line: Measure around your waist at the point in which your pants typically ride.
  4. Measured Inseam: From a standing position, measure from your crotch down the inside leg to the floor.

Stone Glacier's Contour Waist System - Proper Fit and Use

The patented Contour Waist™ System is designed to provide an exact fit around your waist. No more buying pants that are slightly too large or don’t fit quite right. As well, this system allows you to adjust the waist size of your pants to allow for a proper fit when layering base layers or insulation bottoms underneath. To adjust the Contour Waist, follow the below steps:

  1. Unfasten the top buckle attachment and unzip the zipper fly.
  2. While the zipper fly is unzipped, detach the left side (left as when the wearer is looking down on the zipper fly) of the zipper from the hook and loop pad by pulling it down and away, starting at the top.
  3. Reattach the zipper fly to the hook and loop pad by starting at the bottom and pressing it firmly and evenly up towards the top. Attaching the zipper at a steeper angle to the left, will adjust the pants smaller. Attaching the zipper further to the right will adjust the pants larger.
  4. Once the zipper is reattached, zip up the fly as normal and fasten the top buckle, adjusting tension as necessary. Repeat steps 3 & 4 until the proper fit is achieved.
  5. Once you find your proper fit the zipper fly will work as normal and adjustment does not need to be made again until required when layering or as desired.

Stone Glacier's Contour Waist System - Proper Fit and Use

The patented Contour Waist™ System is designed to provide an exact fit around your waist. No more buying pants that are slightly too large or don’t fit quite right. As well, this system allows you to adjust the waist size of your pants to allow for a proper fit when layering base layers or insulation bottoms underneath. To adjust the Contour Waist, follow the below steps:

  1. Unfasten the top buckle attachment and unzip the zipper fly.
  2. While the zipper fly is unzipped, detach the left side (left as when the wearer is looking down on the zipper fly) of the zipper from the hook and loop pad by pulling it down and away, starting at the top.
  3. Reattach the zipper fly to the hook and loop pad by starting at the bottom and pressing it firmly and evenly up towards the top. Attaching the zipper at a steeper angle to the left, will adjust the pants smaller. Attaching the zipper further to the right will adjust the pants larger.
  4. Once the zipper is reattached, zip up the fly as normal and fasten the top buckle, adjusting tension as necessary. Repeat steps 3 & 4 until the proper fit is achieved.
  5. Once you find your proper fit the zipper fly will work as normal and adjustment does not need to be made again until required when layering or as desired.

Top Sizes S-XXXL

Bottom Sizes S-M/LT

Bottom Sizes L-XXL